Introduction
Features at a glance
Specifications
Introduction
Bourne from P-Systems design ethos of utility, the container silo was designed to have the same dimensions as a standard hooklift container. It also features the same two part hinged rear gate.
The lower rear gate lifts up to accept an unloading auger, which conveys the material across the mouth of the container into an unloading auger or pneumatic transfer system. A hydraulic moving floor empties the container into the cross auger.
The container is powered by a hydraulic power pack. The container is connected by quick release couplings and sensors within the unloading cross auger control the operation. Containers can be used as permanent silos or quick changed.
Features at a glance
- Fully automatic operation, designed to link into all pellet and drying systems.
- Containers can be quick changed, with hook lift options available.
- Can be supplied with tarpaulin covers or steel lid with gas struts for outdoor use.
- Doors equipped with rubber seal to keep containers water tight.
- Can be mounted with optional vibrating screen, to prevent oversize material entering the system.
Specifications
| Model | 8 m³ | 15 m³ | 35 m³ | 45 m³ | 70 m³ |
|---|---|---|---|---|---|
| Dimensions L x W x H(m) | 2 x 2.3 x 1.6 | 4 x 2.3 x 1.6 | 6 x 2.3 x 2.5 | 7 x 2.3 x 2.5 | 12 x 2.3 x 2.5 |
| Optional Extras | |||||
| Metal Lid | Hinged metal lid made from sheet steel and rectangular steel section framework. The lid is supported by gas struts. | ||||
| Vibrating Screen | A simple RHS frame with vibrating a 3 phase motor and controls. designed to protect system from oversize materials and contaminants. | ||||
