P300 Series production units
Features at a glance
Specifications
P300 Series production units
The P300 Series are based on the same drive train and share a common chassis. This makes it possible to upgrade a unit to a higher capacity without having to replace the complete unit.
All the units have P-systems unique operating system, which allows unattended operation. They are favoured on the content as they run overnight turning waste made during the working day into valuable pellets, using electricity at a lower night rate.
Special units driven by a hydraulic power transmission are available on request. These units have been developed by P-Systems to work with very dense materials such as beach and oak. The speed of the hydraulic gear motors on these special units can be adjusted to give right the die speed to suit the material you are using.
Features at a glance
- Hydraulic ‘Load Sensing’™ system – Automatically senses the load on the machine and regulates the feed of material to the die chamber. Preventing overloads and shut-downs.
- ‘Easy Start’™ – Integrated into the PCL control system, injects vegetable oil into the material feed at start-up and shut-down, no more blocked dies.
- Automated bearing lubrication system – Increases life expectancy and the need for attention from the operator.
- Hydraulic oil cooler – Allows for 24hr duty cycle.
- Die temperature sensor – Controls material loading and prevents the die chamber from overheating.
- One hydraulically operated/lubricated roller – Adjusts roller gap automatically, roller is constantly cooled and lubricated.
- Remote Monitoring – Units can be connected to the internet for remote monitoring and assistance.
Specifications
| Model | P300-L 7 | P300-L 9 | P300-L 22 | P300-L 30 | P300-LS 37 | P300-LS 45 |
|---|---|---|---|---|---|---|
| Production Rate(kg/h) | 60-120 max.* | 80-160 max.* | 180-360 max.* | 240-500 max.* | 280-580 max* | 320-650 max.* |
| Main Motor Power(Kw) | 7.5 | 9.2 | 22 | 30 | 37 | 45 |
| Hydraulic Pump Motor(Kw) | 1.5 | 1.5 | 1.5 | 1.5 | – | – |
| Dimensions L x W x H(mm) | 2000 x 1100 x 2350 | 2000 x 1100 x 2350 | 2000 x 1100 x 2350 | 2000 x 1100 x 2350 | 1800 x 1100 x 2350 | 1800 x 1100 x 2350 |
| Weight(kg) | 1800 ca. | 1800 ca. | 1800 ca. | 1800 ca. | 2200 ca. | 2200 ca. |
| Hydraulic Oil Tank(L) | 70 | 70 | 70 | 70 | 70 | 70 |
| Die Diameter(mm) | 304 | 304 | 304 | 304 | 304 | 304 |
| Moisture Meter | As standard | As standard | As standard | As standard | As standard | As standard |
| Oil Cooler | Optional item | Optional item | As standard | As standard | As standard | As standard |
| Unloading Auger | As standard | As standard | As standard | As standard | As standard | As standard |
| Optional Extras | ||||||
| Additives Auger | Adds binders to materials with low levels of lignin. The unit is powered by the presses hydraulics. Feed rate is adjustable and linked to the press unit material loading auger. | |||||
| Datalink Pack | An optional item available at time of order only. Allows unit to be connected to a LAN and remotely monitored and controlled. Units performance and health can be checked from Italy. Faults can be diagnosed and corrected, without the need for an engineer. | |||||
| * | Production range quoted is for hardwood – softwood with moisture content 10-15%. Production rates for other materials available on request. | |||||
