P500 Pellet Press


P500 Series - High volume production units

The P500 series are high end production machines designed for long production cycles. The entire range is fitted with hydraulic drives for unrivalled performance with dense materials like beach and oak. The rotation speed of the die is variable and delivers immense torque at low speeds.

All three models of the series share the same chassis, which will allow a unit to be upgraded to a higher capacity without replacing the whole unit.

Features at a glance

  • Hydraulic ‘Load Sensing’™ system – Automatically senses the load on the machine and regulates the feed of material to the die chamber preventing overloads and shut-downs.
  • ‘Easy Start’™ – Integrated into the PCL control system, injects vegetable oil into the material feed at start-up and shut-down, no more blocked dies.
  • Automated bearing lubrication system – Increases  life expectancy and the need for attention from the operator.
  • Hydraulic oil cooler – Allows for 24hr duty cycle.
  • Die temperature sensor – Controls material loading and prevents the die chamber from overheating.
  • One hydraulically operated/lubricated roller – Adjusts roller gap automatically. Roller is constantly cooled and lubricated.
  • Remote Monitoring – Units can be connected to the internet for remote monitoring and assistance.
Model P500-LS 55 P500-LS 75 P500-LS 90
Production Rate(kg/h) 450-900 max.* 600-1200 max.* 750-1500 max*
Main Motor Power(Kw) 55 75 90
Hydraulic Pump Motor(Kw)
Dimensions L x W x H(mm) 2500 x 1100 x 2350 2500 x 1100 x 2350 2500 x 1100 x 2350
Weight(kg) 2800 ca. 2800 ca. 2800 ca.
Hydraulic Oil Tank(L) 70 70 70
Die Diameter(mm) 500 500 500
Moisture Meter As standard As standard As standard
Oil Cooler As standard As standard As standard
Unloading Auger As standard As standard As standard
Optional Extras
Additives Auger Adds binders to materials with low levels of lignin. The unit is powered by the presses
hydraulics. Feed rate is adjustable and linked to the press unit material loading auger.
Datalink Pack An optional item available at time of order only. Allows unit to be connected to a LAN
and remotely monitored and controlled. Units performance and health can be checked
from Italy. Faults can be diagnosed and corrected, without the need for an engineer.
* Production range quoted is for hardwood – softwood with moisture content 10-15%.
Production rates for other materials available on request.

Pellet Systems Limited

37 St Margaret's St



T. 01622 616100

E. mail@pelletsystems.co.uk


Paying for Waste Disposal?

Savings Calculator

Still using skips for sawdust disposal? If you produce good dry sawdust, why loose £200+ per skip?

Our machines can turn your waste into revenue. Remove an unnecessary cost from your balance sheet and increase your profits.