Pellet Systems Limited – Automated Wood Pellet PlantsP300 Pellet Press

P300 Pellet Press

 
 

P300 Series production units

The P300 Series are based on the same drive train and share a common chassis. This makes it possible to upgrade a unit to a higher capacity without having to replace the complete unit.

All the units have P-systems unique operating system, which allows unattended operation. They are favoured on the content as they run overnight turning waste made during the working day into valuable pellets, using electricity at  a lower night rate.

Special units driven by a hydraulic power transmission are available on request. These units have been developed by P-Systems to work with very dense materials such as beach and oak. The speed of the hydraulic gear motors on these special units can be adjusted to give right the die speed to suit the material you are using.

 

Features at a glance

  • Hydraulic ‘Load Sensing’™ system – Automatically senses the load on the machine and regulates the feed of material to the die chamber. Preventing overloads and shut-downs.
  • ‘Easy Start’™ – Integrated into the PCL control system, injects vegetable oil into the material feed at start-up and shut-down, no more blocked dies.
  • Automated bearing lubrication system – Increases  life expectancy and the need for attention from the operator.
  • Hydraulic oil cooler – Allows for 24hr duty cycle.
  • Die temperature sensor – Controls material loading and prevents the die chamber from overheating.
  • One hydraulically operated/lubricated roller – Adjusts roller gap automatically, roller is constantly cooled and lubricated.
  • Remote Monitoring – Units can be connected to the internet for remote monitoring and assistance.
Model P300-L 7 P300-L 9 P300-L 22 P300-L 30 P300-LS 37 P300-LS 45
Production Rate(kg/h) 60-120 max.* 80-160 max.* 180-360 max.* 240-500 max.* 280-580 max* 320-650 max.*
Main Motor Power(Kw) 7.5 9.2 22 30 37 45
Hydraulic Pump Motor(Kw) 1.5 1.5 1.5 1.5
Dimensions L x W x H(mm) 2000 x 1100 x 2350 2000 x 1100 x 2350 2000 x 1100 x 2350 2000 x 1100 x 2350 1800 x 1100 x 2350 1800 x 1100 x 2350
Weight(kg) 1800 ca. 1800 ca. 1800 ca. 1800 ca. 2200 ca. 2200 ca.
Hydraulic Oil Tank(L) 70 70 70 70 70 70
Die Diameter(mm) 304 304 304 304 304 304
Moisture Meter As standard As standard As standard As standard As standard As standard
Oil Cooler Optional item Optional item As standard As standard As standard As standard
Unloading Auger As standard As standard As standard As standard As standard As standard
Optional Extras
Additives Auger Adds binders to materials with low levels of lignin. The unit is powered by the presses
hydraulics. Feed rate is adjustable and linked to the press unit material loading auger.
Datalink Pack An optional item available at time of order only. Allows unit to be connected to a LAN
and remotely monitored and controlled. Units performance and health can be checked
from Italy. Faults can be diagnosed and corrected, without the need for an engineer.
* Production range quoted is for hardwood – softwood with moisture content 10-15%.
Production rates for other materials available on request.

 

 

Pellet Systems Limited

37 St Margaret's St

Canterbury

CT1 2TU

T. 01622 616100

E. mail@pelletsystems.co.uk

 

Paying for Waste Disposal?

Savings Calculator

Still using skips for sawdust disposal? If you produce good dry sawdust, why loose £200+ per skip?

Our machines can turn your waste into revenue. Remove an unnecessary cost from your balance sheet and increase your profits.